Valve(s) Standard

Due to broad subject of valves, standards list below do not incorporate:

  • Non English standards
  • Combustion engine
  • Hydraulic and or Pneumatic fluid power
  • Irrigation related,
  • Medical related,
  • Noise (testing) related
  • Plumbing,
  • Shower/tub,
  • Tyre,
  • Water closet & urinal,
  • Water heater valve,

Furthermore, to avoid confusion and standardizing purpose globally, only API, ASME and ISO related standards are shown.

Check whether your manufacturer is API certified click here

Status of standards are (still) active as per January 2017.

API RP 11V6 Recommended Practice for Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves
API RP 11V7 Recommended Practice for Repair, Testing, and Setting Gas Lift Valves
API RP 14B Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems
API RP 14E Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems
API RP 505 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2
API RP 520 Sizing, selection and installation of pressure relieving devices in refineries
API RP 553 Refinery Valves and Accessories for Control and Safety Instrumented Systems
API RP 591 Process Valve Qualification Procedure
API RP 6DR Recommended practice for the repair and remanufacture of pipeline valves
API RP 615 Valve Selection Guide
API RP 621 Reconditioning of metallic gate, globe and check valves
API SPEC Q1 Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry
API SPEC 6A Specification for wellhead and Christmas tree equipment
API SPEC 6AV1 Specification for Validation of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service
API SPEC 6D Specification for pipeline valves
API SPEC 6DSS Specification for Subsea Pipeline Valves
API SPEC 6FA Specification for fire test for valves
API SPEC 6FD Specification for Fire Test for Check Valves
API SPEC 7NRV Specification for Drill String Non-Return Valves
API SPEC 14A Specification for Subsurface Safety Valve Equipment
API SPEC 19V Subsurface Barrier Valves and Related Equipment
API STD 521 Pressure-relieving and depressurizing systems
API STD 526 Flanged Steel Pressure-relief Valves
API STD 527 Seat Tightness of Pressure Relief Valves
API STD 528 (superseded without replacement) STANDARD FOR SAFETY RELIEF VALVE NAMEPLATE NOMENCLATURE
API STD 594 Check Valves: Flanged, Lug, Wafer and Butt-welding
API STD 598 Valve Inspection and Testing
API STD 599 Metal plug valves – Flanged, threaded and welding ends
API STD 6AV2 Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore
API STD 6DX Petroleum and natural gas industries—Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
API STD 600 Steel Gate Valves – Flanged and Butt-welding Ends, Bolted Bonnets
API STD 602 Gate, Globe, and Check Valves for Sizes DN 100 (NPS 4) and Smaller for the Petroleum and Natural Gas Industries
API STD 603 Corrosion-resistant, Bolted Bonnet Gate Valves—Flanged and Butt-welding Ends
API STD 605 Superseded by: ASME B16.47 Large-Diameter Carbon Steel Flanges (Nominal Pipe Sizes 26 Through 60, Classes 75, 150, 300, 400, 600, and 900)
API STD 607 Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats
API STD 608 Metal Ball Valves-Flanged, Threaded and Butt Welding Ends
API STD 609 Butterfly Valves: Double Flanged, Lug and Wafer Type
 API STD 622 Type testing of process valve packing for fugitive emissions
API STD 623 Steel Globe Valves—Flanged and Buttwelding Ends, Bolted Bonnets
API STD 624 Type Testing of Rising Stem Valves Equipped with Graphite Packing for Fugitive Emissions
API STD 641 Type Testing of Quarter-turn Valves for Fugitive Emissions

 

 

ASME/BPVC 2203-1 2203-1 Omission of Lifting Device Requirements for Pressure Relief Valves on Air, Water Over 140°F, or Steam Service Section VIII, Division 1
ASME/BPVC 2397-1 2397-1 Pressure Relief Valves That Exceed the Capability of Testing Laboratories Section I
ASME/BPVC 2446 2446 Pilot-Operated Pressure Relief Valves for PG-67.2.6 Applications Section I
ASME/BPVC 2530 2530 Use of Power Actuated Pressure Relief System for High Pressure Vessels Instead of Pressure Relief Valves or Rupture Disks Section VIII, Division 3 ANNULLED SUPP 5
ASME/BPVC 2565 2565 Mounting Safety and Safety Relief Valves for Coil Type Heating Boilers Section IV
ASME/BPVC 2561-1 2561-1 Use of Power-Actuated Pressure-Relief System for High-Pressure Vessels Instead of Pressure-Relief Valves or Rupture Disks Section VIII, Division 3 ANNULLED SUPP 5
ASME/BPVC 2675 2675 Use of Noncode Pressure Relief Valves Section VIII, Division 1
ASME/BPVC 2787 2787 Multiple Marking of Certified Capacities for Pressure-Relief Valves Section VIII, Division 1
ASME/BPVC CASE N-131-1 N-131-1 Material for Internal Pressure Retaining Items for Pressure Relief Valves, Classes 1, 2, and 3 Section III, Division 1
ASME/BPVC CASE N-154-1 N-154-1 Projection Resistance Welding of Valve Seats, Classes 1, 2, and 3 Section III, Division 1
ASME/BPVC CASE N-539 N-539 UNS N08367 in Class 2 and 3 Valves Section III, Division 1
ASME/BPVC CASE N-62-7 N-62-7 Internal and External Valve Items, Classes 1, 2, and 3 Section III, Division 1
ASME/BPVC CASE N-703 N-703 Use of Strain Hardened Austenitic Material at Lower Design Stress Values for Class 1 Valves Section III, Division 1
ASME/BPVC CASE N-756 N-756 Alternative Rules for Acceptability for Class 1 Valves, NPS 1 (DN 25) and Smaller With Nonwelded End Connections Other Than Flanges Section III, Division 1
ASME/BPVC CASE N-757-1 N-757-1 Alternative Rules for Acceptability for Class 2 and 3 Valves, NPS 1 (DN 25) and Smaller With Welded and Nonwelded End Connections Other Than Flanges Section III, Division 1
ASME/BPVC CASE N-760-2 N-760-2 Welding of Globe Valve Disks to Valve Stem Retainers, Classes 1, 2, and 3 Section III, Division 1
ASME/BPVC CASE N-800 N-800 Alternative Pressure Testing Requirements for Class 1 Piping Between the First and Second Injection Valves Section XI, Division 1
ASME/BPVC CASE N-855 N-855 SB-148 C95800 Valves for Class 3 Construction Section III, Division 1 SUPP 2
ASME/BPVC CASE N-856 N-856 SA-494 Grade CW-12MW (UNS N30002) Nickel Alloy Castings for Construction of NPS 21/2 and Smaller Flanged Valves for Class 3 Construction Section III, Division 1 SUPP 2
ASME/BPVC CASE N-863 N-863 Postweld Heat Treatment (PWHT) of Valve Seal Welds for P4 and P5A Materials Section III, Division 1 SUPP 7
ASME/BPVC 1876-5 1876-5 Design of Safety Valve Connections Section I
ASME/BPVC 2254 2254 Changeover Valves Installed Between Safety Valves or Safety Relief Valves and Boilers Section I
ASME/BPVC 2256 2256 Valve Markings Section IV
ASME/BPVC 2378 2378 Use of a Power Actuated Pressure Relief Valve for High Pressure Vessels Instead of Pressure Relief Valves or Rupture Disks Section VIII, Division 3 ANNULLED SUPP 5
ASME/BPVC 2529 2529 Drain Valve on Horizontal Helical Coil Watertube Boilers Section IV
ASME/BPVC 2568 2568 HG-701.1 Permissible Mounting Safety Relief Valves for Coil-Type Boilers Section IV
ASME/BPVC 2583 2583 Alternative Relief-Valve Sizing Section IV ANNULLED SUPP 3
ASME/BPVC 2726 2726 Hydrostatic and Pneumatic Testing of Mass-Produced Pressure Vessels With an Intermediate Isolation Valve Between Indicating Gage and Pressure Vessel Section VIII, Division 1
ASME/BPVC 2797 2797 Material Requirements for Valve Stems for Use With Power-Actuated Pressure Relief Systems Section VIII, Division 3
ASME STP-PT-046 REVIEW OF SAFETY CONSIDERATIONS FOR NATURAL GAS PIPELINE BLOCK VALVE SPACING
ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves
ASME B16.10 INTERPRETATIONS Interpretations to B16.10-1992 Face-to-Face and End-to-End Dimensions of Valves – Includes Interpretation No. 1
ASME B16.24 Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves Classes 150, 300, 600, 900, 1500, and 2500
ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 175 psi (Sizes NPS ½ Through NPS 2)
ASME B16.34 Valves-Flanged, Threaded, and Welding End
ASME B16.34 INTERPRETATIONS Interpretations to B16.34-1996 Valves – Flanged, Threaded, and Welding End – Includes Interpretation No. 2
ASME B16.38 Large Metallic Valves for Gas Distribution Manually Operated, NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum
ASME B16.40 Manually Operated Thermoplastic Gas Shutoffs and Valves In Gas Distribution Systems
ASME B16.44 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi
ASME N278.1 Self-Operated and Power-Operated Safety-Related Valves Functional Specification Standard, Reactor Plants and Their Maintenance
ASME ISV TRAINING ASME ASSESSMENT-BASED COURSE: INTRODUCTION TO THE SELECTION OF VALVES – SINGLE-USER LICENSE (COURSE NUMBER: ZABC43) – PDHs: 2.00

 

ISO 5783 Hydraulic Fluid Power – Code for Identification of Valve Mounting Surfaces and Cartridge Valve Cavities – Second Edition
ISO 23551-4 AMD 1 Safety and control devices for gas burners and gas-burning appliances – Particular requirements – Part 4: Valve-proving systems for automatic shut-off valves AMENDMENT 1: Application guidance for the valve-proving system – First Edition
ISO 5210 Industrial Valves – Multi-Turn Valve Actuator Attachments First Edition – First Eidtion
ISO 9461 Hydraulic Fluid Power – Identification of Valve Ports, Subplates, Control Devices and Solenoids First Edition
ISO 21358 Vacuum technology – Right-angle valve – Dimensions and interfaces for pneumatic actuator – First edition
ISO 10432 Petroleum and Natural Gas Industries – Downhole Equipment – Subsurface Safety Valve Equipment – Third Edition
ISO 13758 Liquefied Petroleum Gases – Assessment of the Dryness of Propane – Valve Freeze Method – First Edition
ISO 683-15 Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels – Part 15: Valve Steels for Internal Combustion Engines – Second Edition
ISO 10417 Petroleum and Natural Gas Industries – Subsurface Safety Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress – Second Edition
ISO 12614-3 Road vehicles – Liquefied natural gas (LNG) fuel system components – Part 3: Check valve – First Edition
ISO 12614-4 Road vehicles – Liquefied natural gas (LNG) fuel system components – Part 4: Manual valve – First Edition
ISO 12614-7 Road vehicles – Liquefied natural gas (LNG) fuel system components – Part 7: Pressure relief valve – First Edition
ISO 12614-8 Road vehicles – Liquefied natural gas (LNG) fuel system components – Part 8: Excess flow valve – First Edition
ISO 15500-3 AMD 1 Road vehicles – Compressed natural gas (CNG) fuel system components – Part 3: Check valve AMENDMENT 1 – Second Edition
ISO 15500-3 Road vehicles – Compressed natural gas (CNG) fuel system components – Part 3: Check valve – Second Edition
ISO 15500-4 AMD 1 Road vehicles – Compressed natural gas (CNG) fuel system components – Part 4: Manual valve AMENDMENT 1 – Second Edition
ISO 15500-4 Road vehicles – Compressed natural gas (CNG) fuel system components – Part 4: Manual valve – Second Edition
ISO 15500-6 AMD 1 Road vehicles – Compressed natural gas (CNG) fuel system components – Part 6: Automatic valve AMENDMENT 1 – Second Edition
ISO 15500-6 Road vehicles – Compressed natural gas (CNG) fuel system components – Part 6: Automatic valve – Second Edition
ISO 15500-12 Road Vehicles – Compressed Natural Gas (CNG) Fuel System Components – Part 12: Pressure Relief Valve (PRV) – Second Edition
ISO 15500-14 AMD 1 Road vehicles – Compressed natural gas (CNG) fuel system components – Part 14: Excess flow valve AMENDMENT 1 – Second Edition
ISO 15500-14 Road vehicles – Compressed natural gas (CNG) fuel system components – Part 14: Excess flow valve – Second Edition
ISO 16003 Components for fire-extinguishing systems using gas – Requirements and test methods – Container valve assemblies and their actuators
ISO 23551-4 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves – First Edition
ISO 12619-4 Road vehicles – Compressed gaseous hydrogen (CGH2) and hydrogen/ natural gas blends fuel system components – Part 4: Check valve – First Edition
ISO 4548-9 Methods of test for full-flow lubricating oil filters for internal combustion engines – Part 9: Inlet and outlet anti-drain valve tests – Second Edition
ISO 5208 Industrial valves – Pressure testing of metallic valves – Fourth Edition
ISO 9393-2 Thermoplastics Valves – Pressure Test Methods and Thermoplastics valves for industrial applications – Pressure test methods and requirements – Part 2: Test conditions and basic requirements – Second Edition
ISO 15848-1 Industrial valves – Measurement, test and qualification procedures for fugitive emissions – Part 1: Classification system and qualification procedures for type testing of valves – Second Edition
ISO 15848-2 Industrial valves – Measurement, test and qualification procedures for fugitive emissions – Part 2: Production acceptance test of valves – Second Edition
ISO 16135 Industrial valves – Ball valves of thermoplastics materials – First Edition
ISO 16137 Industrial valves Check valves of thermoplastics materials – First Edition
ISO 16138 Industrial valves Diaphragm valves of thermoplastics materials – First Edition
ISO 16139 Industrial valves Gate valves of thermoplastics materials – First Edition
ISO 21787 Industrial valves – Globe valves of thermoplastics materials – First Edition
ISO 28921-1 Industrial valves – Isolating valves for low-temperature applications – Part 1: Design, manufacturing and production testing – First Edition
ISO 28921-2 Industrial valves – Isolating valves for low-temperature applications – Part 2: Type testing – First Edition
ISO 5211 Industrial Valves – Part-Turn Actuator Attachment – First Edition
ISO 5752 Metal Valves for Use in Flanged Pipe Systems – Face-to-Face and Centre-to-Face Dimensions – Second Edition
ISO 8233 Thermoplastics Valves – Torque – Test Method First Edition
ISO 8659 Thermoplastics Valves – Fatigue Strength – Test Method First Edition
ISO 9393-1 Thermoplastics valves for industrial applications Pressure test methods and requirements Part 1: General – Second Edition
ISO 10497 Testing of valves – Fire type-testing requirements – Third Edition
ISO 4411 Hydraulic fluid power – Valves – Determination of pressure differential/flow characteristics – Second Edition
ISO 5209 General Purpose Industrial Valves – Marking – First Edition
ISO 6403 Hydraulic Fluid Power – Valves Controlling Flow and Pressure – Test Methods – First Edition
ISO 7121 Steel ball valves for general-purpose industrial applications – Third Edition
ISO 10631 Metallic butterfly valves for general purposes – Second Edition
ISO 17082 Pneumatic fluid power Valves Data to be included in supplier literature – First Edition
ISO 17292 Metal ball valves for petroleum, petrochemical and allied industries – Second Edition
ISO 21011 Cryogenic vessels – Valves for cryogenic service – First Edition
ISO 27895 Vacuum technology – Valves – Leak test – First Edition
ISO 6002 Bolted Bonnet Steel Gate Valves – First Edition
ISO 6264 Hydraulic Fluid Power – Pressure-Relief Valves – Mounting Surfaces – Second Edition
ISO 10434 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries – Second Edition
ISO 12238 Pneumatic Fluid Power – Directional Control Valves – Measurement of Shifting Time – First Edition
ISO 14617-8 Graphical Symbols for Diagrams – Part 8: Valves and Dampers – First Edition
ISO 15218 Pneumatic Fluid Power – 3/2 Solenoid Valves – Mounting Interface Surfaces – First Edition
ISO 15665 Acoustics – Acoustic insulation for pipes, valves and flanges – First edition
ISO 15761 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries – First Edition
ISO 17602 Ships and marine technology – Metal valves for use in flanged pipe – Face-to-face and centre-to-face dimensions – First Edition
ISO 17778 Plastics piping systems – Fittings, valves and ancillaries – Determination of gaseous flow rate/ pressure drop relationships – First Edition
ISO 11177 Vitreous and porcelain enamels – Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply – Quality requirements and testing – First Edition
ISO 15364 Ships and marine technology – Pressure/vacuum valves for cargo tanks – Third Edition
ISO 4126-1 AMD 1 Safety devices for protection against excessive pressure – Part 1: Safety valves AMENDMENT 1 – Third Edition
ISO 4126-1 Safety devices for protection against excessive pressure – Part 1: Safety valves – Third Edition
ISO 4126-3 Safety devices for protection against excessive pressure Part 3: Safety valves and bursting disc safety devices in combination – First Edition
ISO 7789 Hydraulic fluid power – Two-, three- and four-port screw-in cartridge valves – Cavities – Second Edition
ISO 14313 CORR 1 Petroleum and natural gas industries – Pipeline transportation systems – Pipeline valves TECHNICAL CORRIGENDUM 1 – Second Edition
ISO 14313 Petroleum and natural gas industries – Pipeline transportation systems – Pipeline valves – Second Edition
ISO 14723 Petroleum and natural gas industries – Pipeline transportation systems – Subsea pipeline valves – Second Edition
ISO 4126-4 Safety devices for protection against excessive pressure – Part 4: Pilot operated safety valves – Second Edition
ISO 4126-10 Safety devices for protection against excessive pressure – Part 10: Sizing of safety valves for gas/liquid two-phase flow – First Edition
ISO 28781 Petroleum and natural gas industries – Drilling and production equipment – Subsurface barrier valves and related equipment – First Edition
ISO 4437-4 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 4: Valves – First Edition
ISO 6182-5 Fire protection – Automatic sprinkler systems – Part 5: Requirements and test methods for deluge valves – Third Edition
ISO 6182-6 Fire protection Automatic sprinkler systems Part 6 Requirements and test methods for check valves – First Edition
ISO 21013-1 Cryogenic vessels – Pressure-relief accessories for cryogenic service – Part 1: Reclosable pressure-relief valves – First Edition
ISO 6182-2 Fire protection – Automatic sprinkler systems – Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms – Third Edition
ISO 6182-3 Fire protection – Automatic sprinkler systems – Part 3: Requirements and test methods for dry pipe valves – Third Edition
ISO 12490 Petroleum and natural gas industries – Mechanical integrity and sizing of actuators and mounting kits for pipeline valves – First Edition
ISO 6182-8 Fire protection Automatic sprinkler systems Part 8: Requirements and test methods for pre-action dry alarm valves – First Edition
ISO 11933-4 Components for Containment Enclosures – Part 4: Ventilation and Gas-Cleaning Systems Such as Filters, Traps, Safety and Regulation Valves, Control and Protection Devices – First Edition
ISO 23551-10 Safety and control devices for gas burners and gas-burning appliances – Particular requirements – Part 10: Vent valves – First Edition
ISO 5135 Acoustics – Determination of Sound Power Levels of Noise from Air-Terminal Devices, Air-Terminal Units, Dampers and Valves by Measurement in a Reverberation Room – Second Edition
ISO 23551-1 Safety and control devices for gas burners and gas-burning appliances – Particular requirements – Part 1: Automatic and semi-automatic valves – Second Edition
ISO 23551-5 Safety and control devices for gas burners and gas-burning appliances – Particular requirements – Part 5: Manual gas valves – First Edition
ISO 23553-1 Safety and control devices for oil burners and oil-burning appliances – Particular requirements – Part 1: Automatic and semi-automatic valves – Second Edition
ISO 1452-4 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure – Unplasticized poly(vinyl chloride) (PVC-U) – Part 4: Valves – First Edition
ISO 16486-4 Plastics piping systems for the supply of gaseous fuels – Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing – Part 4: Valves – First Edition